The Vintage Shop MonsterBrite Plate Filter

The MonsterBrite Wine/Beer Plate Filter has two gaskets (O’Rings), perfectly sealing the inner ring with both with both plates. Features: Easy to assemble, has a unique fastening system, the filter plates have slots instead of holes. The surface area of this filter will extract more yeast and particles than other commonly used filters. The Wine/Beer Plate Filter requires 8.75” diameter pads (not included). For each filtering session you will require two filter pads, of the same micron. For filtering you can use The Vintage Shop Pressurized 3 Gallon Tank, or any electric pump, or any other mechanism to push the wine/beer through the filter. The wine/beer plate filter uses the standard 8.75” diameter filter pads (not included). FAQs: Q. Why Filter Beer or Wine? A. Filtered beer or wine has a sparkling commercial appearance. Filtered beer with little or no yeast content will also age differently, and will not pick up yeast flavours from the sediment in the bottle (or Keg). Q. What is the main difference between this plate filter and the Cartridge filters? A. The MonsterBrite Plate Filter has a large surface area that catches more yeast than the cartridge-type filters, and remove more haze causing particles. Besides, the filter pads are way cheaper than cartridges. You can also change to a fine filter pads if you really want to polish your wine or beer,or simply use a coarse filter pad to remove big particles. Q. Can I use a CO2 pressure tank to push beer through the Filter? A. Yes. Check with your retailer what extra hardware may be required. Q. Will this filter work with gravity? A. Yes. This filter will work by gravity feed.

MonsterBrite Wine/Beer Plate Filter

Easy to assemble, Unique fastening system

Filter plates have slots instead of holes

Each filtering session you will require two filter pads, of the same micron

The wine/beer plate filter uses the standard 8.75” diameter filter pads (not included)